Home > RV Factory/Shop > Air Supply Part Duex

Air Supply Part Duex

May 3rd, 2011

A minor part swap.

Based on some suggestions from fellow (aka more experienced) builders, I moved the shutoff valve to the tank rather than the wall. This takes the pressure off the lead-in hose when closed. Additionally, I added a tank pressure outlet for general use with air nozzles and other high pressure needs.

Easier moisture removal valve

Another suggestion from a builder with arachnophobia was to make the valve on the bottom for moisture removal easier to use. I added an elbow, 4″ nipple, and a ball valve. Much easier to get to, and certainly easier to use.

The rubber mat is temporary to keep the compressor from walking across the floor. I will be bolting it down very soon for many reasons.

Categories: RV Factory/Shop
Comments are closed.